2 Inch Galvanized Pipe Price in Indonesia: By Brand

Hey builders, contractors, and anyone in the middle of a home renovation! You surely know galvanized pipe by now. This steel pipe, coated in zinc, is a champion at resisting rust, whether it goes into water lines, electrical runs or even simple construction. This time we are focusing on a fairly large size that gets a lot of use: the 2 Inch Galvanized Pipe.

Finding the galvanized pipe price for 2 inch pipe in Indonesia is easier said than done. Why? Because prices can jump all over the place depending on many factors, from brand and thickness to the standard used (SNI or non-SNI, where SNI is the Indonesian National Standard). Let's break it down one piece at a time so you buy the right pipe and do not overpay.

Why Does the 2 Inch Galvanized Pipe Matter?

A 2 inch pipe has an outer diameter of about 60.3 mm (depending on the thickness and standard). This size is a good fit for:

Main Water Lines: Carrying water at a high flow rate.
Light Construction Frames: Posts, fences or non-structural supports.
Electrical Cable Conduit: Protecting large cables.

Its handy size keeps demand fairly high, which is why the price deserves careful thought.

2 Inch Galvanized Pipe Price Data (Per Length)

Most pipe in Indonesia is sold by the length, with a standard length of 6 meters. The prices you will find on the market, especially as of November 2025, depend heavily on the pipe wall thickness (often called Sch, short for Schedule, or Medium/Light).

Here is an overview of the price range per length (6 meters) for 2 inch galvanized pipe on the Indonesian market, based on the most relevant data:

Pipe Class	Wall Thickness (mm)	Price Range per Length (6m)	Standard Notes
Light/BSA	2.3 mm	Rp 510,000 - Rp 600,000	Suitable for light installations and fences.
Medium (SNI)	3.2 - 3.6 mm	Rp 690,000 - Rp 975,000	Most common; for medium-pressure water installations and construction.
SCH 40	3.8 - 3.9 mm	Rp 750,000 - Rp 1,050,000	Thicker; for high pressure and industrial use.

Important Note: These prices are average estimates from various marketplaces and distributors. Prices can be much lower if you buy in bulk (for a project) or slightly higher at small retail shops.

Comparing 2 Inch Galvanized Pipe Brands (The Big Players)

A few steel pipe brands dominate in Indonesia, for both black pipe and galvanized pipe. It is hard to get a detailed price comparison between identical products (because every distributor has its own "secret" prices), but three big names are often used as benchmarks, especially for the SNI standard (Standar Nasional Indonesia, the Indonesian National Standard):

1. SPINDO (PT. Steel Pipe Industry of Indonesia)

Reputation: This is one of the largest steel pipe brands in Indonesia. Its quality is beyond doubt and is often used as a reference standard.
2" Medium SNI Galvanized Pipe Price: Prices tend to sit in the mid to upper range. For the 2 inch Medium SNI type (about 3.6 mm thick), the price is often around Rp 718,000 to Rp 975,000 per length (6 meters).
Strengths: Its SNI quality standard is very strong, and both the steel and the galvanized coating are thick.

2. PPI (PT. Pelangi Indah Canindo)

Reputation: Another brand with a strong market share. Its products also often meet the SNI standard.
2" Medium SNI Galvanized Pipe Price: PPI prices are generally similar to or slightly below Spindo for the same specification (Medium SNI). For example, some sellers list the PPI Medium galvanized pipe in 2 inch at around Rp 619,200 - Rp 1,050,000.
Strengths: A good option for projects that need a balance of SNI quality and a competitive price.

3. Other Brands (Examples: Bakrie, Master Steel, etc.)

Reputation: Many other manufacturers offer galvanized pipe. Quality varies.
Price: Pipe from lesser-known manufacturers, or labeled BSA (standard steel) / Light without a clear SNI specification, can be much cheaper. Sometimes for 2 inch pipe with a thickness of 2.0-2.3 mm, the price can be around Rp 500,000.
Strengths: Saves money for non-critical needs (for example, a flagpole or a low-pressure water line).
Note: For a comparison with the Rucika or Wavin brands, be aware that both are better known as makers of PVC pipe, not galvanized pipe (zinc-coated steel pipe). A direct comparison for 2 inch galvanized products is therefore not relevant.

Brand	Class (Example)	Thickness (mm)	Est. Price (Per 6m Length)
SPINDO	Medium SNI	3.6	Rp 718,000 - Rp 975,000
PPI	Medium SNI	3.6	Rp 619,200 - Rp 1,050,000
BSA / Light	Non-SNI	2.3	Rp 514,000 - Rp 600,000

What Drives the Price: Why Is It So Different?

Why does one seller list a 2 inch galvanized pipe at only about Rp 200,000 per meter, while another asks about Rp 900,000 per length? Here are the main factors:

1. Thickness (Pipe Wall Thickness)

This is the single biggest factor. The thicker the pipe, the more steel it uses, so the price climbs automatically.

Light (Thin/BSA): For ordinary water or electrical lines, or light posts. The cheapest. (Example: 2.3 mm).
Medium (Mid-range/SNI Standard): The most common standard for water and gas projects at medium pressure. (Example: 3.2 - 3.6 mm).
SCH 40 / Heavy: For industrial or high-pressure applications. The most expensive. (Example: 3.8 mm and up).

2. Standard and Quality of the Galvanized Coating

SNI (Indonesian National Standard): Pipe labeled SNI (for example SNI 0039:2013 for zinc-coated steel pipe) guarantees a zinc coating quality and thickness that meets the standard. SNI pipe is definitely more expensive than non-SNI pipe because its quality and durability are better assured.
Zinc Coating: The quality and thickness of the galvanized layer largely decide how well the pipe resists rust. A pipe with a thin zinc layer (even if it looks shiny) will rust faster.

3. Pipe Length and How You Buy

Full Lengths (6 Meters): Buying a whole 6 meter length gives the most efficient price per meter.
Cut Pieces/Retail: If you buy short pieces (for example 1 meter, 50 cm, or even 10 cm), the price per meter will definitely be higher because of cutting charges and service fees.

4. Location and Distributor

Prices in Jakarta or Surabaya (close to factories and major distributors) are usually lower than in cities farther away, because of a sizeable extra logistics/shipping cost, given that a 6 meter pipe is heavy and long.

Tips Before You Buy

Define what you need: What is the pipe for? For a clothesline pole, a light or BSA pipe is enough. But for the main water line on a project, go with Medium SNI for long-term safety.
Check the thickness: Do not fixate on price alone. Always ask for the thickness specification in millimeters (mm) or the class (Light, Medium, SCH 40). A 2 inch pipe at 2.3 mm is clearly priced differently from one at 3.6 mm.
Prioritize trusted brands: For important projects, choose proven brands such as SPINDO or PPI, which have clear SNI certification.
Compare total prices: When comparing, make sure you compare pipes with exactly the same specification (Brand + Size + Thickness + Standard). And do not forget to count the shipping cost! This pipe is heavy, so the shipping cost can really pack a punch.

The bottom line: the price of a 2 inch galvanized pipe is not just a number. It is about the quality, thickness and safety standard you get. Do not be lured by a low price for a pipe that corrodes easily!

Hope this rundown helps you decide and get the best price for your project!

Do you have any other questions about building materials, or would you like me to find contacts for the nearest galvanized pipe distributor?